KORALINE Safe LKS

for higher safety in schools and hospitals

The KORALINE Safe LKS special model range of convectors is designed to ensure high unit safety. For increased durability, the casing of the convectors is made of 1.5 mm thick galvanized sheet steel and fitted with a symmetric safety pencilproof grille. The grille comprises perforated holes of small dimensions. The grille is locked in the convector preventing it from being easily removed by unauthorised persons. The Safe convector series has a bevelled edge on the front of the casing to prevent potential injury. The heat exchanger and the casing are fitted with safety locks to prevent removal by unauthorised persons. These safety features, together with the low surface temperature, make the KORALINE Safe LKS series particularly suitable for installation in educational, health and care facilities, administrative and public areas.

Technical data Demand

Natural convection
Higher performance
Low energy consumption
Safety design

Height [mm]	90, 150, 230, 300, 400, 500 mm
Width [mm]	80, 130, 180, 230 mm
Length [mm]	600, 700, 800, 900, 1 000, 1 100, 1 200, 1 400, 1 600, 1 800, 2 000 mm
Output [W]	from 149 to 4 221 W
Max. operating pressure [MPa]	1,2 MPa
Max. operating temperature [°C]	90 °C
Surface temperature [°C]	40 °C _{According to inlet water temperature}
Connecting thread	inner G 1/2"
Connection method	lower (recommended), side

Tepelné výkony [W] při t₁/t₂/t_i = při 75/65/20 ˚C (Δt=50) a 55/45/20 ˚C (Δt=30)/EN 442

Inlet temperature in °C

Outlet temperature in °C

Air temperature in °C

ΔT

ΔT = 50 °C		Length [mm]											Temperature exponent
Width [mm]	Výška [mm]	600	700	800	900	1000	1100	1200	1400	1600	1800	2000	Temperature exponent
130	90	203	252	301	350	399	448	497	595	693	791	889	1,402
180	90	322	397	473	548	624	699	775	926	1077	1228	1379	1,388
230	90	454	563	673	783	892	1002	1112	1331	1550	1769	1988	1,375
80	150	149	185	221	257	293	329	365	437	509	581	653	1,45
130	150	264	336	409	481	553	625	697	842	986	1130	1275	1,39
180	150	471	584	698	812	925	1039	1153	1380	1607	1834	2062	1,42
230	150	579	737	895	1053	1211	1369	1527	1843	2159	2475	2791	1,43
80	230	208	258	308	358	408	459	509	609	709	810	910	1,425
130	230	295	375	456	536	617	698	778	939	1100	1261	1422	1,396
180	230	555	689	823	957	1091	1225	1359	1627	1895	2164	2432	1,412
230	230	683	869	1056	1242	1429	1615	1802	2175	2548	2921	3294	1,422
80	300	223	277	331	385	439	493	547	654	762	870	978	1,43
130	300	317	404	491	578	664	751	838	1011	1185	1358	1532	1,401
180	300	610	757	904	1051	1198	1346	1493	1787	2082	2376	2671	1,404
230	300	750	955	1160	1365	1570	1775	1980	2390	2800	3210	3620	1,414
80	400	243	302	360	419	477	536	595	712	829	947	1064	1,4367
130	400	346	441	535	630	725	819	914	1103	1292	1481	1670	1,4081
180	400	668	829	990	1151	1313	1474	1635	1958	2280	2603	2925	1,3927
230	400	822	1047	1272	1497	1721	1946	2171	2620	3069	3519	3968	1,4031
80	500	261	324	387	450	513	576	639	765	891	1017	1143	1,4436
130	500	373	474	576	678	780	882	984	1187	1391	1594	1798	1,4153
180	500	710	881	1052	1224	1395	1567	1738	2081	2424	2766	3109	1,3816
230	500	875	1114	1353	1592	1831	2070	2309	2787	3265	3743	4221	1,3923

ASSEMBLY

Installation instructions – installation procedure
The first step is to measure and screw in the brackets. Floor-level brackets contain a transport stopper and bracket mount, that allows for easy and stable mounting of heat exchanger onto a bracket. Transport stopper prevents movement and damage to the heat exchanger during transport. Floor brackets can be measured according to the drilling templates included in the package. The heat exchanger is then mounted onto them and connected to the heating system. The heat exchangers must be bled. The last step is to fit the convector casing with the grille and attach it to the brackets. The grilles on Optimal, Power, Safe and Max free-standing convectors are removable for easier cleaning and maintenance. For more detailed information on each KORALINE type, please refer to the installation instructions. The units are supplied assembled, except for the brackets and mounts, valves and extension nipples, if applicable, which are included separately with the product.

KORALINE floor standing convectors are not intended for sitting or bearing weights. These activities can lead to damage to the device, reduce its efficiency and increase the risk of accidents. For safe and efficient heating, it is always necessary to ensure that the convector remains free and the exhaust cover is not covered.

BRACKETS AND MOUNTS

KORALINE free-standing convectors are fitted with floor-level brackets and some higher models also with wall fixing mounts as standard (see the Standard contents list at each model line). Sub-floor brackets and wall brackets are available upon request.

Floor-level brackets - fitted as standard

KORALINE free-standing convectors 2,000 mm in length and above are supplied with a central bracket for greater stability
For a correct installation of floor-level brackets it is necessary to use a transport stopper and bracket mount that also holds the heat exchanger in place during transport.

Floor-level bracket height above floor level for all KORALINE models is 100 mm.

Floor-level bracket casing - optional accessory

Floor-level bracket casings are designed to cover connections and the edges of floor-level brackets, and must be ordered in pairs.


Floor-level bracket without bracket casing	Floor-level bracket casing	Floor-level bracket casing installation

Sub-floor brackets - optional accessory

Lengths over 2000 mm – three brackets for increased stability

Wall brackets - optional accessory

When mounting convectors on walls, the distance between the unit and the wall is 25–45 mm, lengths over 2000 mm – three brackets for increased stability

Wall fixing mounts - Safe and Max models – from 230 mm in height

Included as standard for higher convectors according to a height of the given model.
When mounting convectors on walls, the distance between the unit and the wall is 25–45 mm.

Lower connection

ORDERING CODES

Example of ordering code: LKS-140/23/18-V1SP0-10

KORALINE Safe free-standing convector, length 140 cm, height 23 cm, width 18 cm, Steel casing white RAL 9016, symmetric safety pencilproof grille in casing colour.

KORALINE	Natural convection	Type Safe		Length/Height/Width (cm)		Convector connection	Heat exchanger colour	Material used	Grille type	Grille colour		Casing colour
L	K	S	-	140/23/18	-	V	1	S	P	0	-	10
						counter-flow	without colour	steel	perforated	casing colour		10 RAL 9016 ** Colour chart 99 other RAL colour

Back to list

Contact us

For more information, do not hesitate to contact us