It seems that you are using a browser that does not support today's standard for displaying web content. This may cause some parts of the website to not function properly. We recommend that you update your browser or download one that meets today's standard.

Update

Cookie settings

Cookies are small browser files that allow us to temporarily store information about your device and you, as a user, exclusively while you are browsing the LICON website. These files help us obtain information about traffic and user behavior, based on which we continuously improve the website.

Privacy policy

Back to list

KORALINE Optimal-V LVO 15/23

 with design grille and high-performance electric fan

The KORALINE Optimal-V LVO Height 150 mm, Width 230 mm  range of free-standing convectors is equipped with a specially designed Al/Cu heat exchanger and a set of low-energy, high-performance fans with minimal power consumption to ensure that the convectors achieve high efficiency even at low-temperature gradients. This type of convector is thus ideal for buildings with low-temperature systems such as heat pumps, solar systems, condensing boilers etc. The convectors can be controlled via BMS and due to their immediate response to changes in room temperature, very quiet operation and low surface temperature, they are suitable for use in family homes, apartment buildings and public areas.


heat pump

Technical data Demand
id 457391
  • Heating
  • Forced convection
  • Higher performance
  • Heat pump synergy
Height [mm] 150 mm
Width [mm] 230 mm
Length [mm] 900, 1 200, 1 600, 2 000, 2 400, 2 800 mm
Output [W] from 261 to 6 061 W
Heat exchanger height  [mm] 50  mm
Heat exchanger width  [mm] 150 mm
Heat exchanger effective length [mm] L-260 mm
Fan impeller diameter   40 mm
Max. operating pressure [MPa] 1,2 MPa
Max. operating temperature [°C] 90 °C
Surface temperature  [°C] 40 °CAccording to inlet water temperature
Connection thread 2× G 1/2" inner
Connection method lower only

Tepelné výkony [W] při t1/t2/ti = při 75/65/20 ˚C (Δt=50) a 55/45/20 ˚C (Δt=30)/EN 442

ΔT = 50 °C Length [mm] Temperature exponent
Width
[mm]		 Výška
[mm]		 Switch position 900 1200 1600 2000 2400 2800
230 150 Off 261 383 546 709 872 1035 1
230 150 1 986 1448 2064 2680 3297 3913 1
230 150 2 1257 1846 2632 3417 4203 4988 1
230 150 3 1527 2243 3197 4152 5106 6061 1
​Convector composition KORALINE Optimal-V LVO

      

KORALINE Optimal-V LVO-rozklad-vcetne-cisel_2
Standard contents
1 silver elox aluminium grille
2 galvanized steel RAL 9016 white casing
3 Al/Cu low-water volume heat exchanger, bleed valve, uniquely shaped fins for max. heat output
4 set of low-energy EC 24 V DC quiet operation fans 
5 fan supports
6 floor-level brackets
7 transport stopper and bracket mount
8  connection terminals and FCR-BOX electronic regulator
* assembly instructions and durable packaging
Optional accessories
9 floor-level bracket casing
10 elbow or straight lockshield
10 elbow or straight thermostatic valve

* further RAL lacquers for casings available
*TEP 24 thermoelectric actuator
*SIEMENS RDG 260T, RDG 260KN or RAB21DC room thermostat
*QAA32 room temperature sensor 
*DC voltage supply
* R-Box

HPS
infoThe KORALINE wall-mounted convectors are not designed for sitting or loading. These activities can lead to damage to the device, reduce its efficiency, and increase the risk of accidents. For safe and efficient heating, it is always necessary to ensure that the convector remains free and the exhaust cover grille is not covered.
Optional accessories - Floor-level bracket casing  NEW
New Floor-level bracket casing optional accessory floor-level bracket casings are designed to cover connections and the edges of floor-level brackets, and must be ordered in pairs.zakrytovánízakytování půl LV
 
info KORALINE free-standing convectors with wooden top are supplied with floor-level brackets. Other mounting options (sub-floor brackets, wall-mounting) are not available.
KORALINE LV – výška 150 mm, šířka 230 mm                                                                                                             
HPS LVO_15_23 LVO_15_23
ASSEMBLY AND MOUNTING - (valid for all sizes)

Insert the fan bar into the bracket to establish the spacing for anchoring the bracket to the floor. The heat exchanger is then placed on the bracket and connected to the heating system. The heat exchangers must be bled. The fan sits on the fan support and is connected to the FCR Box. The final step is to install the aluminium grille and attach it by screwing it to the brackets. The grille is removable for easy cleaning. Please refer to the installation instructions for more detailed information.

HPS LVO

 

 

L = Convector length Ld = L – 307 mm
 (for convectors up to 2 800 mm in length)
 For KORALINE Optimal-V LVO over 2000 mm in length, we recommend the use of a central bracket for increased stability. KORALINE floor standing convectors are infonot intended for sitting or bearing weights. These activities can lead to damage to the device, reduce its efficiency and increase the risk of accidents. For safe and efficient heating, it is always necessary to ensure that the convector remains free and the exhaust cover is not covered.

ORDERING CODES

Example of ordering code: LVO-200/15/23-V1SA1-10-RT

KORALINE Optimal-V LVO free-standing convector with fan, Length 200 cm, Height 15 cm, Width 23 cm, Steel casing white RAL 9016, Aluminium silver elox grille, non-lacquered heat exchanger.

KORALINE
Forced 
convection
 
Optimal-V
 
Length/Height/Width (cm)
 
Convector
connection
Heat
exchanger
colour
Material
used 
Grille
type
Grille 
colour
 
Casing colour
 
Electrical
regulation
L V O - 200/15/23 - V 1 S A 1 - 10 - RT

 

 

 

 

 

 
counter-flow
1- without colour
5- black RAL 9005
 
steel
aluminium
elox silver
 
10 - RAL 9016
39 - RAL 9005
** Colour chart Licon 
99 other RAL colour
 
standard
Back to list

Contact us

For more information, do not hesitate to contact us

By submitting the form, you agree to the processing of personal data.