It seems that you are using a browser that does not support today's standard for displaying web content. This may cause some parts of the website to not function properly. We recommend that you update your browser or download one that meets today's standard.

Update

Cookie settings

Cookies are small browser files that allow us to temporarily store information about your device and you, as a user, exclusively while you are browsing the LICON website. These files help us obtain information about traffic and user behavior, based on which we continuously improve the website.

Privacy policy

Back to list

Grilles - Cross

Cross cover grille is manufactured from steel and is intended exclusively for dry environments. Due to its high strength and small slat spacing (pencil-proof design), it is suitable for public and commercial spaces such as restaurants, bars or lobbies, where a higher level of safety is required. The standard surface finish is RAL 9006 (grey) powder coating; other RAL colour chart finishes are available. The grille is rigid and supplied installed in the trench heater. Due to its precise fit, it must be ordered together with the trench heater, the casing of which must be adapted for this type. The Cross cover grille is suitable for design solutions and cannot be combined with U, F or
Thin decorative frames. A special Cross-frame is designed for this grille and is supplied together with the trench heater.

Technical data Demand
id 455742
Cross grilles are standard lacquered with RAL 9006 (grey) powder coating; other RAL colour chart colours are available. Cross grilles are rigid and supplied built-in to the trench heater. Due to their precise fit, Cross grilles must be ordered together with trench heaters. Trench heaters casing must be adapted to fit the Cross grille and are finished with Cross frames. Cross grilles are suitable for design solutions and cannot be combined with U, F or Thin frames.
 
Linear model
cross cross
info   Cross grilles are ordered custom-made. Prices and delivery times are specified on request.
Measurements
Code PM-xx/14 PM-xx/16 PM-xx/20 PM-xx/26 PM-xx/32 PM-xx/34 PM-xx/40
Width - nett [mm] 128 148 188 248 308 328 388
Tolerance +0–1.5 mm. Code width is derived from trench heater width.
Grille airflow
alu wood steel stainless Thin  Cross
63% 55% 60% 60% 63% 58%
Load bearing capacity

EN_PM-kapacita

info  In load-bearing capacity testing, grille slats are placed on two supports and weighed down in the center.
For wooden slats, values are given up to the fracture point of the first fibre. Metal slats are measured up to the point of irreversible deflection.


​Assembly instructions KORAFLEX PM

Decorative frames are available as standard in aluminium with silver, dark bronze or light bronze elox finishes. Frames may also be lacquered (powder coated) using colours from the RAL colour chart. Frames are in every case supplied as a component of trench heaters, and the type required must be specified when ordering in the Order Code. Where trench heaters are finished with a hem, the hem is of the same material as the casing.

        FRAMES CROSS   


      Cross-rámeček 
Lowered casing edge

ORDER CODE

Example of order code: PM-100/26-C6L0

Cover grille, length 100 cm, width 26 cm, Cross version, colour RAL 9006 (grey), linear type, for trench heater without special modifications. Grille measurement given in the order code corresponds with the measurement of the respective trench heater. Net dimension of the grille is available upon request.

Floor
Grille
 
Length/Width (cm)
 
Grille material
Grille colour
Grille type
Grille ending type
P
M
-
100/26
-
C
6
L
0
 
 
 
 
 
 
C Cross
6 RAL 9006
9 other RAL colour
L linear
0 grille for single trench heater
1 trench heater – right face lowered
2 trench heater – left face lowered
3 trench heater – both faces lowered
Back to list

Contact us

For more information, do not hesitate to contact us

By submitting the form, you agree to the processing of personal data.