Detail reference

KORALINE Optimal LKO

The KORALINE Optimal LKO is our most popular model range of low surface temperature convectors, offering the optimal combination of design and heat output. The KORALINE Optimal LKO model range is made of galvanised sheet steel and fitted with a high quality aluminium silver elox grille. Due to the diverse portfolio and the optimal output, the convectors in this series are ideal for heating private houses, residential and office buildings.

Height [mm]	90, 150, 230, 300, 400, 500 mm
Width [mm]	80, 130, 180, 230 mm
Length [mm]	600, 700, 800, 900, 1 000, 1 100, 1 200, 1 400, 1 600, 1 800, 2 000, 2 200, 2 400, 2 600, 2 800, 3 000 mm
Output [W]	from 149 to 6 612 W
Max. operating pressure [MPa]	1,2 MPa
Max. operating temperature [°C]	110 °C
Max. surface temperature [°C]	40 °C
Max. surface temperature	inner G 1/2"
Connection method	lower (recommended), side

Input temperature [°C]

Output temperature [°C]

Air temperature [°C]

ΔT

ΔT = 50 °C		Length [mm]																Temperature exponent
Width [mm]	Height [mm]	600	700	800	900	1000	1100	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000	Temperature exponent
130	90	203	252	301	350	399	448	497	595	693	791	889	987	1084	1182	1280	1378	1,402
180	90	322	397	473	548	624	699	775	926	1077	1228	1379	1530	1681	1832	1983	2134	1,388
230	90	454	563	673	783	892	1002	1112	1331	1550	1769	1988	2208	2427	2646	2865	3085	1,375
80	150	149	185	221	257	293	329	365	437	509	581	653	725	797	869	941	1013	1,45
130	150	264	336	409	481	553	625	697	842	986	1130	1275	1419	1564	1708	1852	1997	1,390
180	150	471	584	698	812	925	1039	1153	1380	1607	1834	2062	2289	2516	2744	2971	3198	1,420
230	150	579	737	895	1053	1211	1369	1527	1843	2159	2475	2791	3108	3424	3740	4056	4372	1,430
80	230	208	258	308	358	408	459	509	609	709	810	910	1010	1111	1211	1311	1412	1,425
130	230	295	375	456	536	617	698	778	939	1100	1261	1422	1584	1745	1906	2067	2228	1,396
180	230	555	689	823	957	1091	1225	1359	1627	1895	2164	2432	2700	2968	3236	3504	3772	1,412
230	230	683	869	1056	1242	1429	1615	1802	2175	2548	2921	3294	3667	4040	4413	4786	5159	1,422
80	300	223	277	331	385	439	493	547	654	762	870	978	1086	1194	1301	1409	1517	1,43
130	300	317	404	491	578	664	751	838	1011	1185	1358	1532	1705	1878	2052	2225	2399	1,401
180	300	610	757	904	1051	1198	1346	1493	1787	2082	2376	2671	2965	3160	3554	3849	4143	1,404
230	300	750	955	1160	1365	1570	1775	1980	2390	2800	3210	3620	4030	4440	4850	5260	5670	1,414
80	400	243	302	360	419	477	536	595	712	829	947	1064	1181	1299	1416	1533	1651	1,4367
130	400	346	441	535	630	725	819	914	1103	1292	1481	1670	1860	2049	2238	2427	2616	1,4081
180	400	668	829	990	1151	1313	1474	1635	1958	2280	2603	2925	3248	3571	3893	4216	4538	1,3927
230	400	822	1047	1272	1497	1721	1946	2171	2620	3069	3519	3968	4418	4867	5317	5766	6215	1,4031
80	500	261	324	387	450	513	576	639	765	891	1017	1143	1269	1395	1521	1647	1773	1,4436
130	500	373	474	576	678	780	882	984	1187	1391	1594	1798	2002	2205	2409	2613	2816	1,4153
180	500	710	881	1052	1224	1395	1567	1738	2081	2424	2766	3109	3452	3795	4138	4481	4823	1,3816
230	500	875	1114	1353	1592	1831	2070	2309	2787	3265	3743	4221	4699	5177	5655	6133	6612	1,3923

Convector composition KORALINE Optimal LKO

Standard contents

1 silver elox aluminium grille
2 galvanized steel casing (RAL 9016 white lacquer)
3 magnetic side cover in casing colour
4 axial thermostatic valve, thread M 30 × 1.5
5 extension nipple for convectors from 150 mm in height
6 Al/Cu heat exchanger for universal connections, low water content, bleed valve, uniquely shaped fins for max. heat output
7 floor-level brackets
8 wall fixing mounts for convectors from 400 mm in height

* safely packaged with assembly instructions

Optional accessories

9 floor-level bracket casing
10thermostatic head

*further RAL lacquers for casings available
*wall brackets
*sub-floor brackets
*elbow or straight lockshield
*elbow or straight thermostatic valve
*TEP 230 or TEP 24 thermoelectric actuator
*SIEMENS RAA21 or RDE 100.1 room thermostat
*QAA32 room temperature sensor
*thermostatic head with incorporated control and immersion remote sensor

SUMMARY OF TYPES KORALINE Optimal LKO

Measurements in mm. Alterations to technical specifications reserved.
Floor-level bracket height above floor level for all KORALINE models is 100 mm.

ASSEMBLY

Installation instructions – installation procedure
The first step is to measure and screw in the brackets. Floor brackets can be measured out according to the drilling templates included in the package. The heat exchanger is then mounted onto them and connected to the heating system. The heat exchangers must be bled. The last step is to fit the convector casing with the grille and attach it to the brackets. The grilles on Optimal, Power, Safe and Max free-standing convectors are removable for easier cleaning and maintenance. For more detailed information on each KORALINE type, please refer to the installation instructions. The units are supplied assembled, except for the brackets and mounts, valves and extension nipples, if applicable, which are included separately with the product.

BRACKETS AND MOUNTS

KORALINE free-standing convectors are fitted with floor-level brackets and some higher models also with wall fixing mounts as standard (see the Standard contents list at each model line). Sub-floor brackets and wall brackets are available upon request.

Floor-level brackets - fitted as standard

KORALINE free-standing convectors 2,000 mm in length and above are supplied with a central bracket for greater stability

Floor-level bracket height above floor level for all KORALINE models is 100 mm.

Floor-level bracket casing - optional accessory

Floor-level bracket casings are designed to cover connections and the edges of floor-level brackets, and must be ordered in pairs.

Floor-level bracket without bracket casing

Floor-level bracket casing

Floor-level bracket casing installation

Sub-floor brackets - optional accessory

Lengths over 2 000 mm – three brackets for increased stability

Wall brackets - optional accessory

When mounting convectors on walls, the distance between the unit and the wall 25–45 mm lengths over 2 000 mm – three brackets for increased stability

Wall fixing mounts
Optimal, Power, Basic and Combi models – from 400 mm in height included as standard

Included as standard for higher convectors according to height of given model. When mounting convectors on walls, the distance between the unit and the wall is 25–45 mm.

MOUNTING

Catalogue KORALINE LICON 2022
Assembly instructions KORALINE LK 2022
Installation template KORALINE LK

Licon Heat - BIM data (Building Information Modeling)

ORDER CODE

Example order code: lko-140/23/18-V1sa1-10

KORALINE Optimal free-standing convector, Length 140 cm, Height 23 cm, Width 18 cm, Steel casing white RAL 9016, silver elox aluminium grille.

KORALINE	Convection	Optimal		Length/Height/Width (cm)		Convector connection	Heat exchanger colour	Material used	Grille type	Grille colour		Casing colour
L	K	O	-	140/23/18	-	V	1	S	A	1	-	10
						counter-flow	elox silver	steel	aluminium	elox silver		10 RAL 9016 ** Colour chart Licon 99 other RAL colour

KORALINE

Convection

Optimal

Length/Height/Width (cm)

Convector

connection

Heat

exchanger
colour

Material

used

Grille

type

Grille

colour

Casing

colour

140/23/18

counter-flow

elox silver

steel

aluminium