Can we use cookies,
so that we know how is our website doing?

KORALINE  OLOC 15/18

The KORALINE OLOC height 150 mm, width 176 mm  range of free-standing convectors is equipped with energy-saving, high-performance fans and an electric motor with minimum power consumption enabling convectors to achieve high efficiency even at low temperature gradients. This makes these convectors ideal for heating buildings fitted with heat pumps. The
convectors can be controlled via BMS and due to their immediate response to changes in room temperature, very quiet operation and low surface temperature, they are suitable for domestic dwellings, apartment buildings and other public buildings.

Height [mm] 150 mm
Width [mm] 176 mm
Length [mm] 900, 1 200, 1 600, 2 000, 2 400, 2 800 mm
Output [W] from 209 to 4 833 W
Heat exchanger height  [mm] 50  mm
Heat exchanger width  [mm] 100 mm
Heat exchanger effective length  [mm] L-300 mm
Fan impeller diameter   40 mm
Max. operating pressure [MPa] 1,2 MPa
Max. operating temperature [°C] 110 °C
Max. surface temperature  [°C] 40 °C
Connection thread 2× G 1/2" inner
Connection method lower only
ΔT = 50 °C Length [mm] Temperature exponent
Width
[mm]
Height
[mm]
Switch position 900 1200 1600 2000 2400 2800
180 150 Off 250 376 543 709 876 1043 1
180 150 1 1025 1537 2220 2904 3587 4270 1
180 150 2 1209 1813 2619 3425 4231 5037 1
180 150 3 1392 2088 3016 3944 4872 5800 1

 Convector composition KORALINE OLOC

 

rozpad OLOC 2022
 

Standard contents

1 silver elox aluminium grille
2galvanized steel RAL 9016 white casing
3 Al/Cu low-water volume heat exchan., bleed valve, uniquely shaped fins for max. heat output
4 set of low-energy EC 24 V DC quiet operation fans
5fan supports
6 floor-level brackets
7 connection terminals and FCR-BOX electronic regulator

* assembly instructions and durable packaging

Optional accessories

*further RAL lacquers for casings available
*elbow or straight lockshield
*elbow or straight thermostatic valve
*TEP 24 thermoelectric actuator
*SIEMENS RDG160T, RDG260KN or RAB21DC room thermostat
*QAA32 room temperature sensor
*IRA 211 remote control
*NTC temperature sensor 
*DC voltage supply
* R-Box  

KORALINE OLOC height 150 mm, width 176 mm                                                                                                                                                               LOGO Licon OC

OLOC_15_18_89LV 15_18 pudo

OLOC_15_18_89LV 15_18 pudo

OLOC FREE-STANDING CONVECTORS – ASSEMBLY AND FASTENING

KORALINE OLOC assembly instructions (valid for all models)

Insert the fan bar into the bracket to establish the spacing for anchoring the bracket to the floor. The heat exchanger is then placed on the bracket and connected to the heating system. The heat exchangers must be bled. The fan sits on the fan support and is connected to the FCR Box. The final step is to install the aluminium grille and attach it by screwing it to the brackets. The grille is removable for easy cleaning. Please refer to the installation instructions for more detailed information.

LV Upevnění_92

ORDER CODE

Example order code: OLOC-200/15/18-1101-RT

KORALINE OLOC free-standing convector with fan, Length 200 cm, Height 15 cm, Width 18 cm, Steel casing white RAL 9016, Aluminium silver elox grille, non-lacquered heat exchanger.

KORALINE

Forced 

convection

  Length/Height/Width (cm)  

Casing colour

(RAL colour chart)

Grille

colour

Heat exchanger

colour

 

Electrical

regulation

OLOC - 200/15/18 - 1 10 1 - RT

 

 

 

 

 

1 RAL 9016

9 other RAL colour
 

elox silver

without colour

 

 

standart 

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.