Detail reference

KORALINE Combi LKC

KORALINE Combi LKC free-standing convectors are equipped with a high-performance heat exchanger with double fin area. The safety grille is perforated directly into the galvanized steel casing of the convectors making it an integral part of the convectors. The design and dimensions of the heat exchanger ensure highly efficient heat transfer. The entire model series achieves higher heat outputs. With more compact dimensions, maximum output and low surface temperature of the casing, these convectors are designed to be used heating domestic homes, modern office buildings, commercial spaces and other large-scale projects.

Height [mm]	230, 300, 400, 500 mm
Width [mm]	130, 180, 230 mm
Length [mm]	600, 700, 800, 900, 1 000, 1 100, 1 200, 1 400, 1 600, 1 800, 2 000, 2 200, 2 400, 2 600, 2 800, 3 000 mm
Output [W]	from 405 to 7 400 W
Max. operating pressure [MPa]	1,2 MPa
Max. operating temperature [°C]	90 °C
Surface temperature [°C]	40 °C _{According to inlet water temperature}
Connecting thread	inner G ¹/₂"
Connecting method	lower (recommended), side

Input temperature [°C]

Output temperature [°C]

Air temperature [°C]

ΔT

ΔT = 50 °C		Length [mm]																Temperature exponent
Width [mm]	Height [mm]	600	700	800	900	1000	1100	1200	1400	1600	1800	2000	2200	2400	2600	2800	3000	Temperature exponent
130	230	405	516	627	738	848	959	1070	1292	1513	1735	1956	2178	2399	2621	2842	3064	1,388
180	230	588	757	926	1096	1265	1434	1604	1942	2281	2620	2959	3297	3636	3975	4313	4652	1,411
230	230	802	1021	1240	1459	1678	1897	2116	2554	2992	3430	3868	4306	4744	5182	5621	6059	1,43
130	300	437	557	676	795	915	1034	1154	1393	1631	1870	2109	2348	2587	2826	3065	3303	1,383
180	300	633	815	997	1179	1362	1544	1726	2091	2455	2820	3185	3549	3914	4278	4643	5007	1,406
230	300	865	1101	1338	1574	1810	2046	2283	2755	3228	3701	4173	4646	5119	5591	6064	6536	1,424
130	400	470	599	728	856	985	1113	1242	1499	1756	2013	2270	2527	2784	3041	3298	3556	1,3741
180	400	680	876	1072	1268	1464	1660	1856	2247	2639	3031	3423	3815	4207	4599	4990	5382	1,3979
230	400	931	1186	1440	1695	1949	2204	2458	2967	3476	3985	4494	5003	5512	6021	6530	7039	1,4151
130	500	494	630	765	900	1035	1170	1305	1575	1845	2115	2386	2656	2926	3196	3466	3736	1,3657
180	500	714	920	1126	1331	1537	1743	1949	2360	2772	3184	3595	4007	4418	4830	5241	5653	1,39
230	500	979	1247	1514	1782	2049	2317	2585	3120	3655	4190	4725	5260	5795	6330	6865	7400	1,4065

Convector composition KORALINE Combi LKC

Standard contents

1 galvanized steel casing with perforated safety grille
2 magnetic side cover in casing colour
3 axial thermostatic valve
4 extension nipple for convectors from 150 mm in height
5 high-performance Al/Cu heat exchanger for universal connections, low water content, bleed valve, and double the area of uniquely formed fins for maximum heat output
6 floor-level brackets
7 transport stopper and bracket mount
8 safety wall mounts for convectors from 400 mm in height

*assembly instructions and durable packaging

Optional accessories

9 floor-level bracket casings

10 thermostatic head

*further RAL lacquers for casings available
*wall brackets
*sub-floor brackets
*elbow or straight lockshield
*elbow or straight thermostatic valve
*TEP 230 or TEP 24 thermoelectric actuator
*SIEMENS RAA21 or RDE 100.1 room thermostat
*QAA32 room temperature sensor
*thermostatic head with incorporated control and immersion remote sensor

SUMMARY OF TYPES KORALINE Combi LKC

Measurements in mm. Alterations to technical specifications reserved.

Floor-level bracket height above floor level for all KORALINE models is 100 mm.

ASSEMBLY

Installation instructions – installation procedure
The first step is to measure and screw in the brackets. Floor-level brackets contain transport stopper and bracket mount, that allows for easy and stable mounting of heat exchanger onto a bracket. Transport stopper prevents movement and damage of heat exchanger during transport. Floor brackets can be measured out according to the drilling templates included in the package. The heat exchanger is then mounted onto them and connected to the heating system. The heat exchangers must be bled. The last step is to fit the convector casing with the grille and attach it to the brackets. The grilles on Optimal, Power, Safe and Max free-standing convectors are removable for easier cleaning and maintenance. For more detailed information on each KORALINE type, please refer to the installation instructions. The units are supplied assembled, except for the brackets and mounts, valves and extension nipples, if applicable, which are included separately with the product.

BRACKETS AND MOUNTS

KORALINE free-standing convectors are fitted with floor-level brackets and some higher models also with wall fixing mounts as standard (see the Standard contents list at each model line). Sub-floor brackets and wall brackets are available upon request.

Floor-level brackets - fitted as standard

KORALINE free-standing convectors 2,000 mm in length and above are supplied with a central bracket for greater stability
For a correct installation of floor-level brackets it is necessary to use transport stopper and bracket mount that also holds heat exchanger in place during transport

Floor-level bracket height above floor level for all KORALINE models is 100 mm.

Floor-level bracket casing - optional accessory

Floor-level bracket casings are designed to cover connections and the edges of floor-level brackets, and must be ordered in pairs.

Floor-level bracket without bracket casing

Floor-level bracket casing

Floor-level bracket casing installation

Sub-floor brackets - optional accessory

Lengths over 2 000 mm – three brackets for increased stability

Wall brackets - optional accessory

When mounting convectors on walls, the distance between the unit and the wall 25–45 mm lengths over 2 000 mm – three brackets for increased stability

Wall fixing mounts

Optimal, Power, Basic and Combi models – from 400 mm in height included as standard

Included as standard for higher convectors according to height of given model. When mounting convectors on walls, the distance between the unit and the wall is 25–45 mm.