Can we use cookies,
so that we know how is our website doing?

KORAWALL Pool-V WVP

KORAWALL Pool-V WVP wall-mounted convector is an efficient, energy-saving forced-convection heating unit and has a light cooling function designed for humid environments. The KORAWALL Pool-V WVP casing is made of AISI 316 stainless steel sheet metal. It is equipped with a heat exchanger and a set of high-performance, low-energy fans. Our wall-mounted units achieve high heating efficiency, even at low temperature gradients. Convectors with forced convection are ideal for installation situations with heat pumps, solar- energy systems, condensing boilers, or as an additional heat source for underfloor heating. They have the advantage of being a source of pleasant heat during the seasonal transition periods of the year. If needed, they can provide a rapid ambient temperature increase. Their light-cooling ability offers an additional option in summer. Wall-mounted convectors with fan can be operated via BMS. Due to their construction and surface finish, the KORAWALL Pool-V WVP convectors are ideal for any space with high air humidity levels (except for salt watter pools and other sea-watter environments).

KORAWALL Pool-V is a custom-made unit. Delivery lead times and price are provided upon request.
KORAWALL  Pool-V WVP AISI 316 stainless steel sheet metal
Height 450 mm
Width 110 mm
Length 600, 750, 1 000, 1 250, 1 500, 1 750, 2 000 mm
Heat output from 190 to 8 960 W
Cooling output up to 1 419 W
Exchanger height 240 mm
Exchanger width 60 mm
Max. operating pressure 1,2 MPa
Max. operating temperature 110 °C
Max. surface temperature 40 °C
Connection thread internal G ½"
Hydraulic connection bottom (right-side or left-side)
Informace  The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

Heat output [W] where t1/t2/ti / EN 16430.
The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

Heat output

Depth 450 / Width 110
Length Degree of rotation Heat output
600 0
600 1
600 2
600 3
750 0
750 1
750 2
750 3
1000 0
1000 1
1000 2
1000 3
1250 0
1250 1
1250 2
1250 3
1500 0
1500 1
1500 2
1500 3
1750 0
1750 1
1750 2
1750 3
2000 0
2000 1
2000 2
2000 3

Cooling performance

Depth 450 / Width 110
Length Degree of rotation Cooling performance
600 0
600 1
600 2
600 3
750 0
750 1
750 2
750 3
1000 0
1000 1
1000 2
1000 3
1250 0
1250 1
1250 2
1250 3
1500 0
1500 1
1500 2
1500 3
1750 0
1750 1
1750 2
1750 3
2000 0
2000 1
2000 2
2000 3

Standard contents

  • AISI 316 stainless steel, lacquered in white RAL 9016
  • weight-bearing part for anchoring the unit on wall in the colour of casing
  • Al/Cu heat exchanger lacquered in black RAL 9005 with low water content, bleed valve and uniquely shaped fins for higher heat output
  • a set of low-energy EC fans 24 V DC with terminal block and regulator (FCR BOX)
  • dust filter
  • installation instructions, durable packaging

Optional accessories                                                                                  

  • further RAL lacquers for casings available
  • TEP 24 V DC thermoelectric actuator 
  • LM thermostatic and control valve 
  • SIEMENS RDG 160T, RDG 260KN or RAB 21-DC room thermostats 
  • QAA32 room temperature sensor
  • SIEMENS IRA 211 remote control 
  • 24 V DC power supply
  • R-Box

Convector composition

 


KORAWALL-WVO-rozklad     

 

 

 

 

 

1 safety cover grille, punched into the casing

2 convector casing made of AISI 316 stainless steel

3 Al/Cu heat exchanger lacquered RAL 9005

4 weight-bearing part for mounting the convector on the wall

5 a set of low-energy EC fans 24 V DC with terminal block (FCR BOX)

6 dust filter


7 LM thermostatic and control valve
 thermoelectric actuator

Informace Note

We recommend equipping the convector with the LM regulation valve with a higher flow rate.

Regulation elements are  not included in the standard delivery package and must be ordered separately.

Regulation elements are identical for all forced-convection products (OC system).

         KORAWALL Pool-V   height 450 mm / width 110 mm

               bokorys        WVO_nárys

Measurements shown in mm.

CONVECTOR ASSEMBLY KORAWALL Pool-V  (WVP) 

  • We recommend placing the wall-mounted unit on the perimeter wall, 100 mm above the floor.
  • We recommend equipping the convector with the LM regulation valve with a higher flow rate .
  • The water inlet must always be connected to the pipe leading to the upper part of the convector and also attach the LM regulation fitting .
  • The heat exchanger and casing must be well protected against contamination. Heating units must be regularly serviced; heat exchangers and fans cleaned.
  • The unit is installed on a wall using the rear weight-bearing part. We recommend to check the correct positioning of the heat exchanger with fittings and the casing prior to connecting the heat exchanger to the heating system.
  • The regulation is identical for KORAFLEX FV trench heaters and KORALINE OLOC free-standing convectors.
  • We recommend equipping the KORAWALL WVO and WVP with a thermo-electric actuator.
  • Do not forget to install the power supply cable near the unit installation site.

Anchoring diagram

KORAWALL WVO

Informace     The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

ORDER CODE

Example order code: WVP-150/45/11-V5RPSP-10-RT

KORAWALL Optimal V WVO wall-mounted convector, length 150 cm, height 45 cm, width 11 cm, sheet metal steel casing white RAL 9016, bottom right connection with standard regulation.

KORAWALL Ventilator Type   Length/Height/Width [cm]  

Exchanger
type

Exchanger
colour

Casing
material

Grille
type

Connection
type

Connection
side
 

Colour
code

  Regulation
W V P - 150/45/11 - V 5 R P S P - 10 - RT

 

 

Pool-V

 

 


 

reversible

black
RAL 9005

stainless

perforated

bottom

P - right
L - left

 

10 RAL 9016
** RAL - Code 

99 other RAL colour

 

24 V DC
regulation

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.