Detail reference

KORAWALL Energy WVE (230VAC)

Wall-mounted convector with forced convection, autonomous control and 230VAC connection.
The KORAWALL Energy WVE wall-mounted 230VAC convector is a powerful fan heater suitable for low temperature heating The convector is equipped with a specially designed Al/Cu heat exchanger in RAL 9005 black lacquer and a set of low energy quiet fans. The convector is equipped with an autonomous control with integrated keypad, allowing fans to be controlled directly on the unit. Connection to the mains is via a ready-to-use terminal block, securely incorporated inside the heater The convector achieves high heat outputs even at low temperature gradients, and in non-condensing zones it can also be used for aftercooling, which is particularly advantageous in the summer months. The convector is well suited for a range of building types from new builds, private houses, office buildings to refurbishments and wherever the heat source is a heat pump, solar system or condensing boiler.

KORAWALL Energy WVE	Wall-mounted convector with forced convection, autonomous control and 230V AC connection
Height	450 mm
Width	110 mm
Length	600, 750, 1 000, 1 250, 1 500, 1 750, 2 000 mm
Heat output	from 190 to 8 960 W
Cooling output	up to 1 419 W
Exchanger height	240 mm
Exchanger width	60 mm
Max. operating pressure	1,2 MPa
Max. operating temperature	90 °C
Surface temperature	40 °C _{According to inlet water temperature}
Connection thread	internal G ½"
Hydraulic connection	bottom (right-side or left-side)

The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

Heat output
Cooling performance

Heat output

Input temperature [°C]

Output temperature [°C]

Air temperature [°C]

ΔT

Depth 450 / Width 110
Length	Degree of rotation	Heat output	Input power [W]	Acoustic pressure [dB(A)]	Acoustic performance [dB(A)]
600	0		1,4	-	-
600	1		2,2	23,2	31,2
600	2		2,8	27,9	35,9
600	3		3,5	32,3	40,3
600	4		4,7	36,8	44,8
600	5		6,0	40,8	48,8
750	0		1,4	-	-
750	1		2,6	24,9	32,9
750	2		3,1	29,6	37,6
750	3		4,1	34,0	42,0
750	4		4,8	38,3	46,3
750	5		6,8	42,3	50,3
1000	0		1,4	-	-
1000	1		2,9	26,3	34,3
1000	2		3,8	30,9	38,9
1000	3		5,4	35,2	43,2
1000	4		7,8	39,8	47,8
1000	5		11,2	43,9	51,9
1250	0		1,4	-	-
1250	1		3,1	26,7	34,7
1250	2		4,1	31,3	39,3
1250	3		6,3	35,3	43,3
1250	4		9,0	40,5	48,5
1250	5		135,0	44,9	52,9
1500	0		1,4	-	-
1500	1		3,3	28,7	36,7
1500	2		4,5	33,3	41,3
1500	3		6,9	37,4	45,4
1500	4		10,1	42,2	50,2
1500	5		14,4	46,4	54,4
1750	0		1,4	-	-
1750	1		4,2	30,2	38,2
1750	2		6,0	34,7	42,7
1750	3		10,0	38,9	46,9
1750	4		12,8	43,5	51,5
1750	5		18,7	47,6	55,6
2000	0		1,4	-	-
2000	1		5,4	30,5	38,5
2000	2		6,3	35,0	43,0
2000	3		9,7	39,0	47,0
2000	4		14,5	43,9	51,9
2000	5		21,2	48,2	56,2

Cooling performance

Input temperature [°C]

Output temperature [°C]

Air temperature [°C]

ΔT

Depth 450 / Width 110
Length	Degree of rotation	Cooling performance	Input power [W]	Acoustic pressure [dB(A)]	Acoustic performance [dB(A)]
600	0		1,4	-	-
600	1		2,2	23,2	31,2
600	2		2,8	27,9	35,9
600	3		3,5	32,3	40,3
600	4		4,7	36,8	44,8
600	5		6,0	40,8	48,8
750	0		1,4	-	-
750	1		2,6	24,9	32,9
750	2		3,1	29,6	37,6
750	3		4,1	34,0	42,0
750	4		4,8	38,3	46,3
750	5		6,8	42,3	50,3
1000	0		1,4	-	-
1000	1		2,9	26,3	34,3
1000	2		3,8	30,9	38,9
1000	3		5,4	35,2	43,2
1000	4		7,8	39,8	47,8
1000	5		11,2	43,9	51,9
1250	0		1,4	-	-
1250	1		3,1	26,7	34,7
1250	2		4,1	31,3	39,3
1250	3		6,3	35,3	43,3
1250	4		9,0	40,5	48,5
1250	5		135,0	44,9	52,9
1500	0		1,4	-	-
1500	1		3,3	28,7	36,7
1500	2		4,5	33,3	41,3
1500	3		6,9	37,4	45,4
1500	4		10,1	42,2	50,2
1500	5		14,4	46,4	54,4
1750	0		1,4	-	-
1750	1		4,2	30,2	38,2
1750	2		6,0	34,7	42,7
1750	3		10,0	38,9	46,9
1750	4		12,8	43,5	51,5
1750	5		18,7	47,6	55,6
2000	0		1,4	-	-
2000	1		5,4	30,5	38,5
2000	2		6,3	35,0	43,0
2000	3		9,7	39,0	47,0
2000	4		14,5	43,9	51,9
2000	5		21,2	48,2	56,2

Convector composition

Standard contents

1 galvanized steel RAL 9016 white or RAL 9005 matt black casing
2 safety cover grille, punched into the casing
3electronic control panel with keypad in the colour of the casing (white, black)
4230 V AC/24 V DC power supply
5weight-bearing part for mounting the convector on the wall
6 Al/Cu heat exchanger lacquered in black RAL 9005 with low water content, bleed valve and uniquely shaped fins for higher heat output
724 V DC tangential low-energy EC fan assembly
8 dust filter

* ambient temperature sensor and water temperature sensor located on the heat exchanger
* installation instructions, installation template
* durable packaging

Optionales Zubehör

9LM straight/corner connection control valve
10 thermostatic head heating/cooling

* casing finish according to RAL colour chart with control keypad in silver

Power control composition

1 control touchpad
2 touchpad board
3 connecting cable
4 control unit
5 temp sensor (water)
6 temp sensor (room)
7 fan control cable

10 grounding cable

11 230 V AC / 24 V DC power supply

KORAWALL Energy WVE (230 VAC) height 450 mm / widht 110 mm

Measurements shown in mm.

CONVECTOR ASSEMBLY KORAWALL Energy WVE 230 VAC

We recommend placing the wall-mounted unit on the perimeter wall, 100 mm above the floor.
We recommend equipping the convector with the LM regulation valve with a higher flow rate .
The water inlet must always be connected to the pipe leading to the upper part of the convector and also attach the LM regulation fitting .
The heat exchanger and casing must be well protected against contamination. Heating units must be regularly serviced; heat exchangers and fans cleaned.
The unit is installed on a wall using the rear weight-bearing part. We recommend to check the correct positioning of the heat exchanger with fittings and the casing prior to connecting the heat exchanger to the heating system.
KORAWALL Energy WVE is to be used with thermostatic head for heating and cooling
Do not forget to install the power supply cable near the unit installation site.
The convector is equipped with an autonomous control with integrated keypad, allowing fans to be controlled directly on the unit.
Wall-mounted convector with forced convection, autonomous control and 230VAC connection.

Anchoring diagram

The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The element is not equipped with condensate drainage.

Catalogue KORAWALL 2024
LEAFLET KORAWALL
Assembly instructions KORAWALL WVD, WVE
Installation template KORAWALL WV

ORDER CODE

Example order code: WVE-150/45/11-V5SPSP-10-RT

KORAWALL Energy WVE Wall-mounted convector with forced convection, autonomous control and 230V AC connecti, length 150 cm, height 45 cm, width 11 cm, sheet metal steel casing white RAL 9016, bottom right connection with standard regulation.

KORAWALL	Ventilator	Type		Length/Height/Width [cm]		Exchanger type	Exchanger colour	Casing material	Grille type	Connection type	Connection side		Colour code		Regulation
W	V	E	-	150/45/11	-	V	5	S	P	S	P	-	10	-	RT
		Energy				reversible	black RAL 9005	steel	perforated	bottom	P - right L - left		10 RAL 9016 39 RAL 9005 ** RAL - Code 99 other RAL colour		standard

KORAWALL

Ventilator

Type

Length/Height/Width [cm]

Exchanger
type

Exchanger
colour

Casing
material

Grille
type

Connection
type

Connection
side

Colour
code

Regulation

150/45/11

Energy

reversible

black
RAL 9005

steel

perforated

bottom

P - right
L - left

10 RAL 9016

39 RAL 9005
** RAL - Code
99 other RAL colour

standard

Back to list

Contact form

For more information, don't hesitate to contact us.