Can we use cookies,
so that we know how is our website doing?

Settings
Usage of personal data
  1. Licon
  2. Products
  3. Wall mounted convectors
  4. < Back
  5. KORAWALL Direct WVD (24VDC)
Back to list

KORAWALL Direct WVD (24VDC)

Wall-mounted convector with forced convection, autonomous control and 24 V DC connection.
The KORAWALL Direct WVD wall-mounted 24 V DC convector is a powerful fan heater suitable for low temperature heating. The convector is equipped with a specially designed Al/Cu heat exchanger in RAL 9005 lacquer and a set of low energy quiet fans. The convector is equipped with an autonomous control with integrated keypad, allowing fans to be controlled directly on the unit. Connection to the mains is via a 24 V DC socket adapter. The convector achieves high heat outputs even at low temperature gradients, and in non-condensing zones it can also be used for aftercooling, which is particularly advantageous in the summer months. The convector is well suited for a range of building types from new builds, private houses, office buildings to refurbishments and wherever the heat source is a heat pump, solar system or condensing boiler.
                                                                                                                Heat Pump

KORAWALL  Direct  WVD Wall-mounted convector with forced convection, autonomous control and 24V DC connection
Height 450 mm
Width 110 mm
Length 600, 750, 1 000, 1 250, 1 500, 1 750, 2 000 mm
Heat output from 190 to 8 960 W
Cooling output up to 1 419 W
Exchanger height 240 mm
Exchanger width 60 mm
Max. operating pressure 1,2 MPa
Max. operating temperature 90 °C
Surface temperature 40 °C According to inlet water temperature
Connection thread internal G ½"
Hydraulic connection bottom (right-side or left-side)
Informace The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

Heat output

Depth 450 / Width 110
Length Degree of rotation Heat output Input power [W] Acoustic pressure [dB(A)] Acoustic performance [dB(A)]
600 0 1,4 - -
600 1 2,1 23,2 31,2
600 2 2,6 27,9 35,9
600 3 3,4 32,3 40,3
600 4 4,4 36,8 44,8
600 5 5,7 40,8 48,8
750 0 1,4 - -
750 1 2,4 24,9 32,9
750 2 2,8 29,6 37,6
750 3 3,8 34,0 42,0
750 4 4,4 38,3 46,3
750 5 6,2 42,3 50,3
1000 0 1,4 - -
1000 1 2,6 26,3 34,3
1000 2 3,5 30,9 38,9
1000 3 4,9 35,2 43,2
1000 4 7,1 39,8 47,8
1000 5 10,3 43,9 51,9
1250 0 1,4 - -
1250 1 2,8 26,7 34,7
1250 2 3,8 31,3 39,3
1250 3 5,8 35,3 43,3
1250 4 8,3 40,5 48,5
1250 5 12,4 44,9 52,9
1500 0 1,4 - -
1500 1 3,0 28,7 36,7
1500 2 4,1 33,3 41,3
1500 3 6,3 37,4 45,4
1500 4 9,2 42,2 50,2
1500 5 13,2 46,4 54,4
1750 0 1,4 - -
1750 1 3,9 30,2 38,2
1750 2 5,5 34,7 42,7
1750 3 9,1 38,9 46,9
1750 4 11,8 43,5 51,5
1750 5 17,1 47,6 55,6
2000 0 1,4 - -
2000 1 5,3 30,5 38,5
2000 2 5,7 35,0 43,0
2000 3 8,4 39,0 47,0
2000 4 13,1 43,9 51,9
2000 5 18,4 48,2 56,2

Cooling performance

Depth 450 / Width 110
Length Degree of rotation Cooling performance Input power [W] Acoustic pressure [dB(A)] Acoustic performance [dB(A)]
600 0 1,4 - -
600 1 2,1 23,2 31,2
600 2 2,6 27,9 35,9
600 3 3,4 32,3 40,3
600 4 4,4 36,8 44,8
600 5 5,7 40,8 48,8
750 0 1,4 - -
750 1 2,4 24,9 32,9
750 2 2,8 29,6 37,6
750 3 3,8 34,0 42,0
750 4 4,4 38,3 46,3
750 5 6,2 42,3 50,3
1000 0 1,4 - -
1000 1 2,6 26,3 34,3
1000 2 3,5 30,9 38,9
1000 3 4,9 35,2 43,2
1000 4 7,1 39,8 47,8
1000 5 10,3 43,9 51,9
1250 0 1,4 - -
1250 1 2,8 26,7 34,7
1250 2 3,8 31,3 39,3
1250 3 5,8 35,3 43,3
1250 4 8,3 40,5 48,5
1250 5 12,4 44,9 52,9
1500 0 1,4 - -
1500 1 3,0 28,7 36,7
1500 2 4,1 33,3 41,3
1500 3 6,3 37,4 45,4
1500 4 9,2 42,2 50,2
1500 5 13,2 46,4 54,4
1750 0 1,4 - -
1750 1 3,9 30,2 38,2
1750 2 5,5 34,7 42,7
1750 3 9,1 38,9 46,9
1750 4 11,8 43,5 51,5
1750 5 17,1 47,6 55,6
2000 0 1,4 - -
2000 1 5,3 30,5 38,5
2000 2 5,7 35,0 43,0
2000 3 8,4 39,0 47,0
2000 4 13,1 43,9 51,9
2000 5 18,4 48,2 56,2

Convector composition

KORAWALL WVD rozpad

Standard contents

logo HPS

1 galvanized steel RAL 9016 white or RAL 9005 matt black casing
2  safety cover grille, punched into the casing 
3 electronic control panel with keypad in the colour of the casing (white, black)
4  230 V AC/24 V DC power supply (adapter)
5 weight-bearing part for anchoring the unit on wall in the colour of casing
6 Al/Cu heat exchanger lacquered in black RAL 9005 with low water content, bleed valve and uniquely shaped fins for higher heat output
7 a set of  24 V DC tangential low-energy EC fan assembly
8  dust filter

* ambient temperature sensor and water temperature sensor located on the heat exchanger
* installation instructions, installation template
* durable packaging

 

Optional accessories

9 LM straight / corner connection control valve
10 thermostatic head heating/cooling

* casing finish according to RAL colour chart with control keypad in silver

Power control composition

                   displej WVDregulace WVD

 

 

1 control touchpad                                                                                                                                
2 touchpad board
3 connecting cable
4 control unit
5 temp sensor (water)
6 temp sensor (room)
7 fan control cable
8 supply connector
9 230 V AC / 24 V DC power supply (adapter)

 

         KORAWALL  Direct WVD (24VDC)   height 450 mm / widht 110 mm

               KORAWALL bokorysWVO_nárys
Measurements shown in mm.

CONVECTOR ASSEMBLY KORAWALL Direct  (WVD) 

  • We recommend placing the wall-mounted unit on the perimeter wall, 100 mm above the floor.
  • We recommend equipping the convector with the LM regulation valve with a higher flow rate .
  • The water inlet must always be connected to the pipe leading to the upper part of the convector and also attach the LM regulation fitting .
  • The heat exchanger and casing must be well protected against contamination. Heating units must be regularly serviced; heat exchangers and fans cleaned.
  • The unit is installed on a wall using the rear weight-bearing part. We recommend to check the correct positioning of the heat exchanger with fittings and the casing prior to connecting the heat exchanger to the heating system.
  • KORAWALL Direct VWD is to be used with thermostatic head for heating and cooling
  • Do not forget to install the power supply cable near the unit installation site.
  • The convector is equipped with an autonomous control with integrated keypad, allowing fans to be controlled directly on the unit.
  • Connection to the mains is via a 24 V DC socket adapter.

Anchoring diagram

KORAWALL WVO

Informace     The unit is designed for cooling in the non-condensation zone only, i.e. above the dew-point temperature. The unit is not equipped with condensate drainage.

ORDER CODE

Example order code: WVD-150/45/11-V5SPSP-10-RT

KORAWALL Direct WVD wall-mounted convector with forced convection, autonomous control, length 150 cm, height 45 cm, width 11 cm, the color of casing including weight-bearing part for mounting – white RAL 9016, bottom right connection with 230 V AC/24 V DC power supply (adapter).

KORAWALL Ventilator Type   Length/Height/Width [cm]  

Exchanger
type

Exchanger
colour

Casing
material

Grille
type

Connection
type

 Connection
side		  

Colour
code

   Regulation
W V D - 150/45/11 - V 5 S P S P - 10 - RT

 

 

Direct

 

 


 

reversible

black
RAL 9005

steel

perforated

bottom

P - right
L - left

 

10 RAL 9016

39 RAL 9005
** RAL - Code 
99 other RAL colour

  

standard
Back to list

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

Licon s.r.o.
Průmyslová zóna Sever
Svárovská 699, Stráž nad Nisou 463 03
Czech Republic
Phone
+420 485 131 157
Email
info@licon.cz
export@licon.cz
Opening hours
7:00 - 15:30
It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.
Update browser