KORALINE OLOC

FREE STANDING CONVECTORS with fan assisted and optimized convection

Exclusive free standing convectors design enhanced by the state-of-theart technologies. Universal design of the free standing convectors with high efficiency also at low temperature gradients. This prederminates them as ideal radiators to be heated by heat pumps.
• used for heating
• high efficiency at low temperature of the heating water
• also suitable for installations with a heat pump
• energy efficient fans with an electric engine and a minimal intake
• immediate reaction to temperature changes in the room
• very quiet operation
• possibility of control through BMS (Building Management System)
• only bottom connection
• the convector is intended for dry environment

Version Exclusive coated in RAL 9010 zinc galvanised steel with aluminium unpainted grille

Height ( mm )

150 mm

Width (mm )

111, 176, 236 mm

Length (mm ) 900, 1200, 1600, 2000, 2400, 2800 mm
Exchanger height ( mm ) 50 mm 
Exchanger width ( mm ) 50/100/150 mm
Exchanger effective length ( mm )

L-300/ L-300/ L-260 mm

Fans' impeller diameter ( mm )

30/40/40 mm

Connection to the heating system

2x G 1/2“ inner

ΔT = 50 °C Length [mm] Temperature exponent
Width [mm] Depth [mm] Switch position 900 1200 1600 2000 2400 2800
110 150 Vyp. 160 240 347 453 560 667 1
1 366 550 794 1038 1282 1527 1
2 498 746 1078 1410 1742 2073 1
3 629 943 1362 1782 2201 2620 1
180 230 Vyp. 250 376 543 709 876 1043 1
1 1025 1537 2220 2904 3587 4270 1
2 1209 1813 2619 3425 4231 5037 1
3 1392 2088 3016 3944 4872 5800 1
240 300 Vyp. 313 460 655 851 1046 1242 1
1 1183 1738 2477 3216 3956 4695 1
2 1508 2215 3158 4100 5043 5986 1
3 1833 2692 3837 4982 6128 7273 1

Convectors assembly

Rozklad OLOC

Note:

  • Standard supply does not include the regulation. The regulation must be ordered separately in accordance with the technical parameters.
  • Electrical regulation and regulation elements see cataloug 
  • Regulation is identical for all OC convectors

Standard delivery contains

  • sheathing of zinc galvanised steel sheet coated in shade RAL 9016 – white
  • AI/Cu heat exchanger with low water content, air vent and uniquely shaped lamellas for a higher       heat output
  • low-energy fans
  • connecting terminal (F Box)
  • temperature switch
  • stands for fixing to clean floor (it is not possible to use the wall mounting brackets or stands for the    subfloor with the OLOC product)

Convector breakdown

1 aluminium cover grid

2 metal plating
3 heat exchanger OR-J2
4 fans
5 fan support
 6 stands
7 connecting terminal (F Box)
8 screw DIN 7981

Optional accessories

  • shut off valve, thermostatic valve head or an actuator

  •  in case of ordering more than 5 units it is possible to select another sheathing colour shade  Colour  chart  (the manufacturer must be consulted in connection with the change)

          LV 15_11

 KORALINE OLOC 15/11

 

 

LV 15_11 pudo

LV 15_18

 KORALINE OLOC 15/18

 

LV 15_18 pudo

LV 15_24

 KORALINE OLOC 15/24

 

LV 15_24 pudo

Installation technique of KORALINE OLOC

(valid for all models)
Determine the stands spacing for anchoring them to the floor by pushing the fan's rail into the stands. The heat exchanger is then positioned in the stands and connected to the heating system. The fan is fixed to the fan support and connected to the F-box.
Finally, the cover with the cover grill is put on and screwed onto the stands. The grill is removable for easy cleaning. You will find more detailed information in the installation instructions.

L = Convector length
Ld = L – 300 mm (up to the convector length of 1 400 mm)
Ld = L – 400 mm (up to the convector length of 2 000 mm)
Ld = L – 600 mm (above the convector length of 2 000 mm

 

Note: For the heating benches of more than 2 m in length we recommend installing 2 pairs of stands on a subfloor, or alternatively 2 pairs of wall brackets.

Weights and water volumes OLOC

  KORALINE LV / OLOC 15/11 15/18 15/24
               kg/bm 9,2 11,21 12,10
                  l/bm 0,28 0,6 0,85

 

Montáž

LV foto

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.
This site uses cookies to provide best customer experience and analysis. By browsing this site you accept that.
More information