Can we use cookies,
so that we know how is our website doing?


The KORALINE OLOC height 150 mm, width 111 mm range of free-standing convectors is equipped with energy-saving, high-performance fans and an electric motor with minimum power consumption enabling convectors to achieve high efficiency even at low temperature gradients. This makes these convectors ideal for heating buildings fitted with heat pumps. The
convectors can be controlled via BMS and due to their immediate response to changes in room temperature, very quiet operation and low surface temperature, they are suitable for domestic dwellings, apartment buildings and other public buildings.

Height [mm] 150 mm
Width [mm] 111 mm
Length [mm] 900, 1 200, 1 600, 2 000, 2 400, 2 800 mm
Output [W] from 133 to 2 183 W
Heat exchanger height  [mm] 50  mm
Heat exchanger width  [mm] 50 mm
Heat exchanger effective length  [mm] L-300 mm
Fan impeller diameter  30 mm
Max. operating pressure [MPa] 1,2 MPa
Max. operating temperature [°C] 110 °C
Max. surface temperature  [°C] 40 °C
Connection thread 2× G 1/2" inner
Connection method lower only
ΔT = 50 °C Length [mm] Temperature exponent
Switch position 900 1200 1600 2000 2400 2800
110 150 Off 160 240 347 453 560 667 1
110 150 1 366 550 794 1038 1282 1527 1
110 150 2 498 746 1078 1410 1742 2073 1
110 150 3 629 943 1362 1782 2201 2620 1

 Convector composition KORALINE OLOC


rozpad OLOC 2022

Standard contents

1 silver elox aluminium grille
2galvanized steel RAL 9016 white casing
3 Al/Cu low-water volume heat exchan., bleed valve, uniquely shaped fins for max. heat output
4 set of low-energy EC 24 V DC quiet operation fans
5fan supports
6 floor-level brackets
7 connection terminals and FCR-BOX electronic regulator

* assembly instructions and durable packaging

Optional accessories

*further RAL lacquers for casings available
*elbow or straight lockshield
*elbow or straight thermostatic valve
*TEP 24 thermoelectric actuator
*SIEMENS RDG160T, RDG260KN or RAB21DC room thermostat
*QAA32 room temperature sensor
*IRA 211 remote control
*NTC temperature sensor 
*DC voltage supply
* R-Box  

KORALINE OLOC height 150 mm, width 111 mm                                                                                                                                                               LOGO Licon OC

OLOC_15_11_88LV 15_11 pudo


KORALINE OLOC assembly instructions (valid for all sizes)

Insert the fan bar into the bracket to establish the spacing for anchoring the bracket to the floor. The heat exchanger is then placed on the bracket and connected to the heating system. The heat exchangers must be bled. The fan sits on the fan support and is connected to the FCR Box. The final step is to install the aluminium grille and attach it by screwing it to the brackets. The grille is removable for easy cleaning. Please refer to the installation instructions for more detailed information.

LV Upevnění_92


Example order code: OLOC-200/15/11-1101-RT

KORALINE OLOC free-standing convector with fan, Length 200 cm, Height 15 cm, Width 11 cm, Steel casing white RAL 9016, Aluminium silver elox grille, non-lacquered heat exchanger.




  Length/Height/Width (cm)  

Casing colour

(RAL colour chart)



Heat exchanger





OLOC - 200/15/11 - 1 10 1 - RT






1 RAL 9016

9 other RAL colour

elox silver

without colour




Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.