KORALINE Economic

FREE STANDING CONVECTORS with natural convection 

KORALINE Economic is the most economical version of free standing convector. This type of
product has an embossed grille in the steel casing that forms its integral part. Wide range of
dimensions and higher heat outputs satisfy even demanding customers.

Height 90, 150, 230, 300 mm
Width 130, 180, 230 mm
Length 600, 700, 800, 900, 1 000, 1 100, 1 200, 1 400, 1 600, 1 800, 2 000, 2 200, 2 400, 2 600, 2 800, 3 000 mm
Output from 203 to 5 670 W
Max. operating pressure 1,2 MPa
Max. operating temperature 110 °C
Max. surface temperature 40 °C
Connecting thread inner G 1/2"
Connection method bottom (recommended), side
ΔT = 50 °C Length [mm] Temperature exponent
Width [mm] Height [mm] 600 700 800 900 1000 1100 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
130 90 203 252 301 350 399 448 497 595 693 791 889 987 1084 1182 1280 1378 1,402
180 90 322 397 473 548 624 699 775 926 1077 1228 1379 1530 1681 1832 1983 2134 1,388
230 90 454 563 673 783 892 1002 1112 1331 1550 1769 1988 2208 2427 2646 2865 3085 1,375
130 150 264 336 409 481 553 625 697 842 986 1130 1275 1419 1564 1708 1852 1997 1,390
180 150 471 584 698 812 925 1039 1153 1380 1607 1834 2062 2289 2516 2744 2971 3198 1,420
230 150 579 737 895 1053 1211 1369 1527 1843 2159 2475 2791 3108 3424 3740 4056 4372 1,430
130 230 295 375 456 536 617 698 778 939 1100 1261 1422 1584 1745 1906 2067 2228 1,396
180 230 555 689 823 957 1091 1225 1359 1627 1895 2164 2432 2700 2968 3236 3504 3772 1,412
230 230 683 869 1056 1242 1429 1615 1802 2175 2548 2921 3294 3667 4040 4413 4786 5159 1,422
130 300 317 404 491 578 664 751 838 1011 1185 1358 1532 1705 1878 2052 2225 2399 1,401
180 300 610 757 904 1051 1198 1346 1493 1787 2082 2376 2671 2965 3160 3554 3849 4143 1,404
230 300 750 955 1160 1365 1570 1775 1980 2390 2800 3210 3620 4030 4440 4850 5260 5670 1,414

Rozklad šedá

 

KORALINE Economic

Standard supply content

1 galvanised steel casing with embossed grille, painted in RAL 9016 white

2 side connection cover

 3 axial thermostatic valve 425, thread M 30 × 1,5

4 from the height 150 mm – extension piece 425 

5 Al/Cu heat exchanger for universal connection with low water content, air vent and unique vertically  shaped slats for higher heat output

6 bracket for finished floor   List of brackets and fastening​ 

 

Optional accessories

7 covers of stands for finished floor   List of brackets and fastening​ 

     
      
KORALINE LKE

Height 90 mm
Width 130 mm

LKE 090_130

Height 90 mm
Width 180 mm

LKE 090_180

Height 90 mm
Width 230 mm

LKE 090_230

Height 150 mm
Width 130 mm

LKE 150_130

Height 150 mm
Width 180 mm

LKE 150_180

Height 150 mm
Width 230 mm

LKE 150_230

Height 230 mm
Width 130 mm

LKE 230_130

 

Height 230 mm
Width 180 mm

LKE 230_180

Height 230 mm
Width 230 mm

LKE 230_230

Height 300 mm
Width 130 mm

LKE 300_130

Height 300 mm
Width 180 mm

LKE 300_180

Height 300 mm
Width 230 mm

LKE 300_230

Installation instructions

  • Floor mounted brackets - You may select from stands for a subfloor or finished floor. The subfloor variant alllows a height tolerance of approx. 50 mm. Dimensions for fastening to the floor is shown in the picture
    Fastening of KORALINE LKX and LKE floor brackets to a finished floor
    Upevnění KORALINE  na čistou podlahu
    Fastening of KORALINE LKX and LKE brackets to a subfloor
    Upevnění KORALINE na hrubou podlaha
  • Wall mounted brackets - We suggest mounting at least 100 mm above the finished floor.    Supplied brackets     (2 – 3 pcs) allow a height tolerance of 20 mm, length tolerance of 10 mm. 

    Upevnění KORALINE na stěnu

Assembly procedure 

The first step is to measure and fix brackets by drilling. Then you may install the heat exchanger on them and connect it to the heating system. The last step is to mount the case with cover grille and anchor it to brackets. Cover grille of KORALINE Exclusive is detachable for easier cleaning. For detail information see the assembly manual. Units are supplied assembled, except for stands and brackets, valve and a potential extension piece, which are attached to the product separately.

KORALINE Economic

Installation instructions KORALINEInstallation instructions KORALINE

LICON - Assembly instruction KORALINE LKAssembly instruction KORALINE LK

Šablony k upevnění KORALINE LK Installation template KORALINE LK

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.
This site uses cookies to provide best customer experience and analysis. By browsing this site you accept that.
More information