Can we use cookies,
so that we know how is our website doing?

Korado

KORALINE Basic LKB

The KORALINE Basic LKB model series is the standard version of our low surface temperature floor convectors. In this model series, the safety exhaust grille is perforated directly into the galvanized steel casing of the convector, making it an integral part of the convector. Optimal outputs and a favourable price make KORALINE Basic the ideal model series for heating private homes, apartment blocks and office buildings.

Height [mm] 90, 150, 230, 300, 400, 500 mm
Width [mm] 130, 180, 230 mm
Length [mm] 600, 700, 800, 900, 1 000, 1 100, 1 200, 1 400, 1 600, 1 800, 2 000, 2 200, 2 400, 2 600, 2 800, 3 000 mm
Output [W] from 203 to 6 612 W
Max. operating pressure [MPa] 1,2 MPa
Max. operating temperature [°C] 110 °C
Max. surface temperature  [°C] 40 °C
Connecting thread inner G 1/2"
Connection method lower (recommended), side
ΔT = 50 °C Length [mm] Temperature exponent
Width
[mm]
Height
[mm]
600 700 800 900 1000 1100 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
130 90 203 252 301 350 399 448 497 595 693 791 889 987 1084 1182 1280 1378 1,402
180 90 322 397 473 548 624 699 775 926 1077 1228 1379 1530 1681 1832 1983 2134 1,388
230 90 454 563 673 783 892 1002 1112 1331 1550 1769 1988 2208 2427 2646 2865 3085 1,375
80 150 149 185 221 257 293 329 365 437 509 581 653 725 797 869 941 1013 1,45
130 150 264 336 409 481 553 625 697 842 986 1130 1275 1419 1564 1708 1852 1997 1,39
180 150 471 584 698 812 925 1039 1153 1380 1607 1834 2062 2289 2516 2744 2971 3198 1,42
230 150 579 737 895 1053 1211 1369 1527 1843 2159 2475 2791 3108 3424 3740 4056 4372 1,43
80 230 208 258 308 358 408 459 509 609 709 810 910 1010 1111 1211 1311 1412 1,425
130 230 295 375 456 536 617 698 778 939 1100 1261 1422 1584 1745 1906 2067 2228 1,396
180 230 555 689 823 957 1091 1225 1359 1627 1895 2164 2432 2700 2968 3236 3504 3772 1,412
230 230 683 869 1056 1242 1429 1615 1802 2175 2548 2921 3294 3667 4040 4413 4786 5159 1,422
80 300 223 277 331 385 439 493 547 654 762 870 978 1086 1194 1301 1409 1517 1,43
130 300 317 404 491 578 664 751 838 1011 1185 1358 1532 1705 1878 2052 2225 2399 1,401
180 300 610 757 904 1051 1198 1346 1493 1787 2082 2376 2671 2965 3160 3554 3849 4143 1,404
230 300 750 955 1160 1365 1570 1775 1980 2390 2800 3210 3620 4030 4440 4850 5260 5670 1,414
130 400 346 441 535 630 725 819 914 1103 1292 1481 1670 1860 2049 2238 2427 2616 1,4081
180 400 668 829 990 1151 1313 1474 1635 1958 2280 2603 2925 3248 3571 3893 4216 4538 1,3927
230 400 822 1047 1272 1497 1721 1946 2171 2620 3069 3519 3968 4418 4867 5317 5766 6215 1,4031
130 500 373 474 576 678 780 882 984 1187 1391 1594 1798 2002 2205 2409 2613 2816 1,4153
180 500 710 881 1052 1224 1395 1567 1738 2081 2424 2766 3109 3452 3795 4138 4481 4823 1,3816
230 500 875 1114 1353 1592 1831 2070 2309 2787 3265 3743 4221 4699 5177 5655 6133 6612 1,3923

Convector composition KORALINE Basic LKB

 

Basic-složení

Standard contents

1 galvanized steel casing incorporating perforated safety grille, lacquered white RAL 9016
2 magnetic side cover in casing colour
3 axial thermostatic valve, M 30 × 1.5 thread
4 extension nipple for convectors from 150 mm in height
5 Al/Cu low water vol. heat exchanger for universal connections, bleed valve, uniquely shaped fins
6 floor-level brackets
7 wall fixing mounts for convectors from 400 mm in height

*assembly instructions and durable packaging

Optional accessories

8 floor-level bracket casings

9 thermostatic head

*further RAL lacquers for casings with perforated grilles available
*wall brackets 
*sub-floor brackets
*elbow or straight lockshield
*elbow or straight thermostatic valve
*TEP 230 or TEP 24 thermoelectric actuator 
*SIEMENS RAA21 or RDE 100.1 room thermostat
*QAA32 room temperature sensor
*thermostatic head with incorporated control and immersion remote sensor

SUMMARY OF TYPES KORALINE Basic LKB

Basic_30
Basic_31

    Measurements in mm. Alterations to technical specifications reserved.

  Floor-level bracket height above floor level for all KORALINE models is 100 mm.       

ASSEMBLY

Installation instructions – installation procedure
The first step is to measure and screw in the brackets. Floor brackets can be measured out according to the drilling templates included in the package. The heat exchanger is then mounted onto them and connected to the heating system. The heat exchangers must be bled. The last step is to fit the convector casing with the grille and attach it to the brackets. The grilles on Optimal, Power, Safe and Max free-standing convectors are removable for easier cleaning and maintenance. For more detailed information on each KORALINE type, please refer to the installation instructions. The units are supplied assembled, except for the brackets and mounts, valves and extension nipples, if applicable, which are included separately with the product.


Montáž_54
Montáž_55

BRACKETS AND MOUNTS

KORALINE free-standing convectors are fitted with floor-level brackets and some higher models also with wall fixing mounts as standard (see the Standard contents list at each model line). Sub-floor brackets and wall brackets are available upon request.

Floor-level brackets - fitted as standard

KORALINE free-standing convectors 2,000 mm in length and above are supplied with a central bracket for greater stability

Stojánky na čistou podlahu

 

Floor-level bracket height above floor level for all KORALINE models is 100 mm.

Floor-level bracket casing - optional accessory

Floor-level bracket casings are designed to cover connections and the edges of floor-level brackets, and must be ordered in pairs.

 

bez zakrytování

Kryt připojení z rozpadu

 

Zakrytování

Floor-level bracket without bracket casing Floor-level bracket casing Floor-level bracket casing installation

Sub-floor brackets - optional accessory

Stojanky na hrubou podlahu

Lengths over 2 000 mm – three brackets for increased stability. 

Wall brackets  - optional accessory                                 

Konzole na zeď

When mounting convectors on walls, the distance between the unit and the wall  25–45 mm lengths over 2 000 mm – three brackets for increased stability

Wall fixing mounts
Optimal, Power, Basic and Combi models – from 400 mm in height included as standard

                                            Stenova_fixace_lko

Included as standard for higher convectors according to height of given model. When mounting convectors on walls, the distance between the unit and the wall is 25–45 mm.

MOUNTING 

Upevnění_55

ORDER CODE

Example order code: LKB-140/23/18-V1SP0-10

KORALINE Basic LKB free-standing convector, Length 140 cm, Height 23 cm, Width 18 cm, Steel casing and grille white RAL 9016.

KORALINE

Natural

convection

Type
Basic
  Length/Height/Width (cm)  

Convector

connection

Heat

exchanger
colour

Material

used 

Grille

type

Grille 

colour

 

Casing

colour

L K B - 140/23/18 - V 1 S P 0 - 10

 

 

 

 

 

 

counter-flow
 

without colour 

steel

perforated

casing colour

 

10 RAL 9016

** see colour chart Licon

99 other RAL colour 

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.