GRILLES - STEEL
Steel profile grilles are available in roll-up and linear models, and feature high load bearing capacity. They are particularly suitable for public buildings, halls, car showrooms, corridors, etc.
Each slat is separated by steel spacers and the entire product is lacquered in the same colour, as standard RAL 9006 (grey) powder coating. Other RAL colour chart colours are, however, available on request.
Roll-up model
For steel roll-up grilles, each slat is connected by springs and spacers in the same colour as the grille.
Linear model
For linear grilles, each slat is connected by bolts and spacers in the same colour as the grille.
Measurements
| Code | PM-xx/14 | PM-xx/16 | PM-xx/20 | PM-xx/26 | PM-xx/32 | PM-xx/34 | PM-xx/40 |
| Width - nett (mm) | 128 | 148 | 188 | 248 | 308 | 328 | 388 |
Tolerance +0–1.5 mm. Code width is derived from trench heater width.
Grille airflow
| alu | wood | steel | stainless | Thin | Cross |
| 63% | 55% | 60% | 60% | 63% | 58% |
Load bearing capacity
In load bearing capacity testing, grille slats are placed on two supports and weighed down in centre.
For wooden slats, values are given up to the fracture point of the first fibre. Metal slats are measured up to the point of irreversible deflection.
Decorative frames are available as standard in aluminium with silver, dark bronze or light bronze elox finishes. Frames may also be lacquered (powder coated) using colours from the RAL colour chart. Frames are in every case supplied as a component of trench heaters, and the type required must be specified when ordering in the Order Code. Where trench heaters are finished with a hem, the hem is of the same material as the casing.
U-frame - standard | F-frame - optional |
 |  |
ORDER CODE
Example order code: PM-100/26-S6R0
Floor grille length 100 cm, width 26 cm, steel model, RAL 9006 colour (grey) lacquered, roll-up, for single trench heater without alteration. Grille measurement, given in the order code, corresponds with the measurement of the respective trench heater. Nett dimension of the grille is available upon request.
| Floor | Grille | Length/Width (cm) | Grille material | Grille Colour | Grille type | Grille ending type | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | M | - | 100/26 | - | S | 6 | R | 0 | |||
|
|
|
|
|
|
| S steel | 6 RAL 9006 | R roll-up L linear | 0 grille for single trench heater 1 grille for trench heater with lowered face - input side 2 grille for trench heater with lowered face - opposite input side 3 grille for trench heater with both sides lowered |
Contact form
For more information, don't hesitate to contact us.
