GRILLES - ALUMINIUM ELOX
The standard finish for aluminium grilles is silver elox. Other models are available in dark and light bronze elox. Other RAL colour chart colours are available as powder coating.
Aluminium elox grilles are suitable for dry and humid environments (where installed in humid environments, grilles must be cleaned regularly with clean water and thoroughly dried). They are available in roll-up and linear models. Both roll-up and linear grilles are supplied as a whole. Decorative frame covers may be chosen using the same colour scheme as grilles, and are supplied as a component of trench heaters.
Roll-up model
Roll-up aluminium silver | Roll-up aluminium dark bronze |
Roll-up aluminium light bronze | Roll-up aluminium black elox - NEWS |
Linear model
Linear aluminium silver | Linear aluminium dark bronze |
Linear aluminium light bronze | Linear aluminium black elox - NEWS |
Where a linear grille is required, technical consultation is necessary, as the casing may need to undergo alteration. Note, please, that the linear grilles must be ordered together with trench heaters.
Measurements
| Code | PM-xx/14 | PM-xx/16 | PM-xx/20 | PM-xx/26 | PM-xx/32 | PM-xx/34 | PM-xx/40 |
| Width - nett (mm) | 128 | 148 | 188 | 248 | 308 | 328 | 388 |
Tolerance +0–1.5 mm. Code width is derived from trench heater width.
Grille airflow
| alu | wood | steel | stainless | Thin | Cross |
| 63% | 55% | 60% | 60% | 63% | 58% |
Load bearing capacity
In load bearing capacity testing, grille slats are placed on two supports and weighed down in centre.
For wooden slats, values are given up to the fracture point of the first fibre. Metal slats are measured up to the point of irreversible deflection.
Decorative frames are available as standard in aluminium with silver, dark bronze or light bronze elox finishes. Frames may also be lacquered (powder coated) using colours from the RAL colour chart. Frames are in every case supplied as a component of trench heaters, and the type required must be specified when ordering in the Order Code. Where trench heaters are finished with a hem, the hem is of the same material as the casing.
U-frame - standard | F-frame - optional | Hem |
 |  |  |
ORDER CODE
Example order code: PM-100/26-A1R0
Floor grille, length 100 cm, width 26 cm, aluminium, silver elox, roll-up, for single trench heater without alteration. Grille measurement given in the order code corresponds with the measurement of the respective trench heater. Nett dimension of the grille is available upon request.
| Floor | Grille | Length/Width (cm) | Grille material | Grille Colour | Grille type | Grille ending type | ||
|---|---|---|---|---|---|---|---|---|
| P | M | - | 100/26 | - | A | 1 | R | 0 |
|
|
|
|
|
| A aluminium Y alu T-profile solely for curved models and series with curve | 1 silver elox 5 black elox (A-profile only) | R roll-up L linear | 0 grille for single trench heater 1 grille for trench heater with lowered face - input side 2 grille for trench heater with lowered face - opposite input side 3 grille for trench heater with both sides lowered |
Contact form
For more information, don't hesitate to contact us.
