KORASPACE

The facade convectors KORASPACE by their direct location on the facade prevent penetration of the cold air into the interior space. The warm air rising from the convectors mixes with the cold air and creates a thermal screen, which provides greater thermal comfort of the indoor space and prevents condensation forming on the glass surface.

• design freedom
• high-performance Al/Cu heat exchangers
• excellent controllability and fast heating start-up
• no heat transfer to the external facade
• additional space for placement of other piping

Model KORASPACE Economic   grey coated casing (RAL 9007) and unpainted exchanger
Model KORASPACE Exclusive  grey coated casing (RAL 9007) and painted exchanger (RAL 9007)
Model KORASPACE InPool  casing in stainless steel AISI 316 and unpainted exchanger
Depth (mm)

56 mm

Width (mm) 120, 150, 180 mm
Length (mm)  800 až 3000 ( po 200 mm) 
Max. working pressure  (MPa)  1,2 MPa 
Max. working temperature  (°C) 110 °C
Connecting thread inner G 1/2"
ΔT = 50 °C Length [mm] Temperature exponent
Height [mm] Width [mm] 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
60 120 154 202 251 300 349 397 446 495 543 592 641 690 1,3
60 150 305 401 498 595 692 788 885 982 1078 1175 1272 1369 1,3
60 180 305 401 498 595 692 788 885 982 1078 1175 1272 1369 1,3

Standard delivery contains

  • coated zinc galvanised steel casing in RAL 9007
  • heat exchanger with low water content and uniquely shaped lamellas air vent
  • connecting material
  • strong packaging contains assemlby guide

 Optional specification

  • version Exclusive or InPool (using stainless steel AISI 316)
  • coated heat exchanger
  • if more that 5 pieces are ordered, another colour shade may be ordered according to the RAL scale  (the change must be consulted with the manufacturer)
  • thermoelectric drive or thermostatic valve head and shut-off valves

 

KORASPACE

Overview of manufactured types 

KORASPACE - xxx/6/12  KORASPACE - xxx/6/15 
( height 5,6 cm, width 11,4 cm, with optional integrated piping run )  (height 5,6 cm, width 15 cm, without integrated piping run )
KORASPACE-rez 6-12

KORASPACE-rez 6-15

KORASPACE - xxx/6/18   
( height 5,6 cm, width 17,4 cm, with optional integrated piping run)   
KORASPACE-rez 6-18  

Facade convectors installation

Facade convectors installation technique
Main load bearing U shape part is fixed to the facade's carrying elements. Then the heat exchanger is inserted and connected to the heating system. Last step consists of positioning the top part and screwing of all parts together. It is possible to make design modifications for the particular installation.

Installation on horizontal crosspiece, between vertical supports

 

Installation on vertical support

Montáž vodorovný příčník Montáž svislý nosník

 

Convector FK assembly KORASPACE

Connections with thermostatic valve and thermoelectric drive

 

Connections with shut-off valve

Montáž ventil montáž šroubení

 

KORASPACE

 

1  carrier part

2  M8 fastening screw with washer

3  air vent

4 heat exchanger

5 top cover part

6 end part

7 screw (DIN 7981) 

Contact form

For more information, don't hesitate to contact us.

Read about how we handle your general data.

It seems you are using a browser which does not support moderns standards. We recommend that you use a browser which does support these technologies.
This site uses cookies to provide best customer experience and analysis. By browsing this site you accept that.
More information